The system facilitates accurate measurement of areas, lengths, maximum and minimum heights, and calculates average heights for earthworks. It automatically determines the plane height based on average measurements, completing land leveling. The inclined plane operation requires only setting the start and end heights, eliminating the need for a base station. Connectivity to various network differential systems and remote monitoring of vehicle position and status are also supported.
FEATURES HIGHLIGHTS
Single-slope operation
Double-inclined operation
Application scenarios
Paddy fields are leveled
It can be used with various types and sizes of graders.
Specification
Hardware |
||
Appearance Dimension |
256*156*42 |
|
Protection |
IP65 |
|
Satellite Antenna |
Support 2 way(Main/Sub) |
|
Data Interface |
Support(1 way) |
|
Wi Fi |
IEEE802.11b/g/n |
|
4G |
LTE-FDD:B1/B3/B5/B8 LTE-TDD:B34/B38/B39/B40/B41 |
|
Bluetooth |
SPP, BLE |
|
Camera |
Support (1 way) |
|
Sim Crad |
Support dual card dual standby |
|
Speaker |
Support |
|
Display |
10.1 inch |
|
RAM |
2GB+16GB |
|
Technical |
||
System |
Android 10.0 |
|
Satellite System |
Full system & Full frequency point |
|
Frequency Band |
DBS : B1I B2I B3I B1C B2a B2b GPS : L1C/A L1C L2C L5C GLONASS : L1 L2 L1C GALILEO: E1 E2 E5a E5b E6 QZSS: L1 L2 L5 L6 |
|
RTK Accuracy |
Plane: 1cm+1ppm High: 1.5cm+1ppm |
|
Time Accuracy |
20ns |
|
Targeted Accuracy |
0.2 Degrees/1m Baseline |
|
Speed Accuracy |
0.03m/s |
|
RTK Initialization Time |
<5s |
|
Differential Method |
NTRIP, GPS MQTT, Base Station, LoRa |
|
Work Environment |
||
Working Temperature |
-20℃ ~ 70℃ |
|
Working Voltage |
9~16VDC |
|
Working Current |
2.5A Max |
Specification
Satellite Antenna |
|
Hardware |
|
Appearance Dimension |
Φ142*66.5mm |
Protection |
IP65 |
Connector specification |
TNC female |
Centering Rod Thread |
5/8" -11 |
Technical |
|
Frequency Band
|
BDS:B1I B2I B3I B1C B2a B2b GPS:L1 L2 L5 GLONASS:L1 L2 L3 GALILEO:E1 E5a E5b E6 QZSS:L1 L2 L5 L6 |
Working Temperature |
-20℃ ~ 70℃ |
Appearance Dimension |
Φ171*76mm |
Protection |
IP55 |
Rated Torque |
7N. m |
Rated Current |
10A |
Rated Power |
50W |
Rated Speed |
80 (100) r/min |
Peak Torque |
16N.m |
Work Environment |
|
Working Temperature |
-25℃ ~ 55℃ |
Humidity |
5%-90%RH |
Angle Sensor Hardware |
|
Appearance Dimension |
Φ114*67.5mm |
Protection |
IP67 |
Accuracy |
0.01℃ |
Data Rate |
10Hz |
Work Environment |
|
Working Temperature |
-20℃ ~ 70℃ |
Working Voltage |
5v |